- Diodes[2]
- Integrated Circuits[6]
- Transistors[2]
- Inductors[6]
- Resistors[4]
- Push Button Switches[6]
- Potentiometers[1]
- LED Displays[6]
- Relays[6]
- Computer Cables & Connectors[6]
- Fuses[3]
- Sensors[4]
- Terminal Blocks[6]
- Oscillators[6]
- Acoustic Components[3]
- Speakers[1]
- Instrument Parts & Accessories[6]
- RAMs[1]
- Antennas for Communications[2]
- Contact Person : Ms. Leung Antonia
- Company Name : Shenzhen E-Chips Technology Co., Ltd.
- Tel : 0086-755-82867603
- Fax : 0086-755-83793928
- Address : ,,FLAT/RM 5 6/F SHUN ON COMM BLDG 112-114 DES VOEUX RD CENTRAL HK
- Country/Region : China
PICkit 3 USB PIC Development Programmer&Debugger for Microchip MCU
Wholesale
Brief Introduction:QLS PICkit 3 is new design Enhanced PICKIT 3 programmer/debugger, this item is a simple, low-cost in-circuit debugger that is controlled by a PC running MPLAB IDE (v8.20 or greater) software on a Windows platform. The PICkit 3 programmer/debugger is an integral part of the development engineer’s tool suite. The application usage can vary from software development to hardware integration.This PICkit 3 programmer/debugger is a debugger system used for hardware and software development of Microchip PIC microcontrollers (MCUs) and dsPIC Digital Signal Controllers (DSCs) that are based on In-Circuit Serial Programming (ICSP) and Enhanced In-Circuit Serial Programming 2-wire serial interfaces. In addition to debugger functions, the PICkit 3 programmer/debugger system also may be used as a development programmer.The debugger system executes code like an actual device because it uses a device with built-in emulation circuitry, instead of a special debugger chip, for emulation. All available features of a given device are accessible interactively, and can be set and modified by the MPLAB IDE interface.
The PICkit 3 allows debugging and programming of PIC and dsPIC Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11 or 6pin) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming?.The PICkit 3 can now also reprogram any PIC microcontroller with a simple push of a button.
Features: * Size: 58(L) × 30(W) × 6.5(H) * Full-speed USB support using Windows standard drivers * Real-time execution * Processors run at maximum speeds * Built-in over-voltage/short circuit monitor * Low voltage to 5V (1.8 to 5V range) * Diagnostic LEDs (power, active, status) * Read/write program and data memory of microcontroller * Erase of all memory types (EEPROM, ID, configuration and program) with verification * Peripheral freeze at breakpoint * Two ICSP Out port: RJ12 or 6pin. * Support external DC9V power input, and include external power. * It can stable output maximum DC5V for target VDD ( other PICkit 3 only can output maximum 4.7-4.8V ) * It can output maximum current 450mA for target VDD(other PICkit 3 only can output maximum 50mA ) * Program up to 512K byte flash with the Programmer-to-G0. * Firmware upgradeable from PC/web download
Pls send your purchase List,BOM List to our Sales department!
| LTC1605IN#PBF | IC A/D CONV 16BIT SAMPLNG 28-DIP | - | Linear Technology |
| ADS7841P | IC 12-BIT A/D 4CH SERIAL 16-DIP | - | Texas Instruments |
| TC811CKW713 | IC A/DCONV 3 1/2DGT LOPWR MQFP44 | - | Microchip Technology |
PICkit 3 USB PIC Development Programmer&Debugger for Microchip MCU
